Industrial Design

Project 8.1 – The Tool Holder
Directions:
1. Create two new layers named Cutting Plane and Hatch Pattern.
2. Set the linetype for the Cutting Plane layer to DashedX2 and set the lineweight to .60mm.
3. Set the linetype for the Hatch Pattern layer to Continuous and the lineweight to Default.
Use the ANSI31 hatch pattern to draw the section lines.
4. Save the .dwg file and generate the .pdf drawing.
When you are finished, this drawing file and pdf file will contain the dimensioned multi-views and the isometric drawing of the Tool Holder