Heat Transfer Project
Pictured below is a traditional method of roasting a whole lamb.
A motor turns the lamb. Assume the lamb weighs 30 pounds and will be cooked to 165°F (74°C) in the center of the meat. The lamb can be modeled as a cylinder (Please consider: is there meat in the center of the lamb?) For the first 30 minutes the lamb will be 4 inches from the coals, then the lamb should be raised higher from the coals.
For the spit method you are to:
1) Develop an analytic model with equations which describes the cooking process .
2) List your assumptions and parameters— they must be reasonable.
a. The height above the coals.
b. The internal temperature of the lamb.
c. The dimensions of the cylinder used as a model for the lamb.
d. The RPM of the motor.
3) Solve the equations and determine the following: What is the surface temperature of the lamb if the center of the lamb’s meat is 165°F?
4) Write your results as an engineering report. . See below 5) You will be graded on the accuracy and completeness. There is no definitive “correct” answer—your thought process in solving the problem is very important.
Engineering Report:
Report Format and Content
Do not cut and paste equations from other sources. Do not scan and use jpegs or other image formats of the equations you use. (Part of the assignment is learning to write/type the equations and symbols correctly.) When needed please use the Greek symbols for properties or variables.
Table of Contents: List the sections of your report. Your table of contents and all other text you include in your report should be 12 font and no larger than 1″ margins.
Problem Statement: Type out the problem you are solving.